RelMo 2008 SP1a (June 2008)

This release fixes a problem with some of the later models of electronic total station and some third party programs which export data directly in the load file format.  Some of these systems output point observation data which contains angular measurements to an apparent accuracy including tenths of seconds.  It is possible using this data that RelMo may calculate the position of some observations incorrectly.  

Data which is converted by the RelMo conversion program (RMConvert) is not affected by this problem.

To download the updated program files, select the link below and run the program.  The RelMo 2008 Update program will search for your existing version of RelMo and update the executable files and the help file.

Download RelMo 2008 SP1a Update (5.8 Mb)

Hardware Key Problems (Posted 22.02.08)

We have realised over the last couple of months that there is a compatibility problem with the latest version of the DesKey hardware key drivers. The latest version at the time of writing is 7.14. Some users have upgraded to this version and some have not.

Basically it stems down to an incompatibility between older versions of the DesKey drivers and their latest version. Problem range from version 7 clients refusing to communicate properly with version 6 servers, to various components of RelMo and other AiTS software items not working properly. In particular the later versions of Licence Manager (v7.x) refuse to start on some machines with a variety of errors displayed.

The solution to the problem is to make sure that you update all computers that are running any AiTS software to the latest version of the dongle drivers. This can be downloaded direct from the DESKey site, or from the links below,

For stand-alone or client computers download and install the program dk2wn32.exe

For server computers download and run the self executable zip file desnetinstallation714.exe This extracts a series of files into a folder (Usually your TEMP folder).   From that folder run the setup.exe program. 

Please note: These programs are not the same as those supplied on the November 2007 RelMo 2008 CD. That CD contained the version 6.21 drivers.

Do please ask if you experience any other problems or need further assistance.

RelMo 2008 SP1 (Posted 21.02.08)

RelMo 2008 SP1 is now available.  A summary of the major changes and bug fixes in RelMo 2008 SP1 can be viewed here.  You can download an update to the latest version from the link below.

The help file has not yet been updated to reflect these changes but will be updated shortly. 

A new user manual for SP1 is also available and may be downloaded directly from here (5.8 Mb).  This normally resides in C:\Program Files\AiTS\Documents and a link is created by the install program to point to this location.

To download the updated program files, select the link below and run the program.  The RelMo 2008 Update program will search for your existing version of RelMo and update the executable files and the help file.

Download RelMo 2008 SP1 Update (5.8 Mb)

RelMo 2008 (Posted 06.11.07)

RelMo 2008 is now available.  A summary of the major changes in RelMo 2008 can be viewed here.  An update CD will be supplied to all registered users of RelMo in the next week or so, but you can download an update to the latest version from the link below.

The help file has also been updated to reflect these changes and will also be updated using this link. 

A new user manual is also available and may be downloaded directly from here (5.8 Mb).  This normally resides in C:\Program Files\AiTS\Documents

To download the updated program files, select the link below and run the program.  The RelMo 2008 Update program will search for your existing version of RelMo and update the executable files and the help file.

Download RelMo 2008 Update package (7.9 Mb)

RelMo 2008 (Posted 06.11.07)

RelMo 2008 is now available.  A summary of the major changes in RelMo 2008 can be viewed here.  An update CD will be supplied to all registered users of RelMo in the next week or so, but you can download an update to the latest version from here.

The help file has also been updated to reflect these changes and will also be updated using this link. 

A new user manual is also available and may be downloaded directly from here (5.8 Mb).  This normally resides in C:\Program Files\AiTS\Documents

To download the updated program files, select the link below and run the program.  The RelMo 2008 Update program will search for your existing version of RelMo and update the executable files and the help file.

Download RelMo 2008 Update package (7.9 Mb)

RelMo 2005 SP3 was released today, 2nd February 2006.  This service release fixes a number of problems identified since the SP1 and SP2 releases and adds several new features.   A summary of the changes introduced in this version can be viewed here.

The demo version and RelMo3 have also been updated.  The help file has also been updated to reflect these changes.

The User Manual is currently being updated and will be posted to the site once complete.

Download the latest version from here.  Or if you're not a registered user, why not try out the demo version instead.

RelMo 2005 SP2 was released today, 30th August 2005.  This service release fixes a number of problems identified since the SP1 release and adds several new features.   A summary of the changes introduced in this version can be viewed here.

The demo version and RelMo3 have also been updated as too has the download utility. 

The User Manual is currently being updated and will be posted to the site once complete.

Download the latest version from here.  Or if you're not a registered user, why not try out the demo version instead.

AiTS and MathTech are proud to announce that RelMo has been chosen as the forensic mapping software to be used by all the New Zealand Police Serious Crash Units.

Initial training has already taken place and RelMo and other AiTS products will be rolled out across the entire country during the next few months.

Many UK police forces already use RelMo as part of their forensic collision investigation process and a growing number rely on RelMo exclusively for all their forensic mapping.

RelMo 2005 SP1 was released today, 6th May 2005.  This service release fixes a number of issues in the original version of RelMo 2005 as well as adding a number of new features.  A summary of the new features added can be viewed here.

The demo version and RelMo3 have also been updated as too has the download utility. 

Download the latest version from here.  Or if you're not a registered user, why not try out the demo version instead.

RelMo 2005 was officially launched today, 3rd December 2004.  This release adds many new features and makes creating 2D and 3D surveys even easier than before.

Download the latest version from here.  Or if you're not a registered user, why not try out the demo version instead.